Product Details
AC / DC signal Converters / Isolators:
Description:
Function:
These converters / isolators used to convert input signal into galvanically & optically isolated signals linearly proportional to the input. 4-Wire converters have two wires for the auxiliary Supply voltage & the other two set of wires for 4-20 mA or voltage input / output. The output signal is generally current 4-20 mA or DC Voltage.
Different combinations of input / output 4-Wire Signal Converters / Isolators are available as below:
- DC Volt I/P to 4-20mA output
- DC mV I/P to 0/4-20mA converter
- 0/4-20mA DC to 0/4-20mA DC converter.
- DC mV to DC Voltage converter
- AC current to 0/4-20mA converter
- AC voltage to 0/4-20mA converter
- Resistance / Potentiometer to 0/4-20mA converter
- Load Cell Signal amplifier / Transmitter.
NOTE: Auxiliary supply voltages of 24/48 VDC or 110/230 VAC can be supplied as per the requirement. Dual output models are available as per the I/O requirements.
Salient features of our Signal converters / isolators:
- Various input / output signals combination available from large basket.
- Auxiliary supply voltages of AC & DC types with different voltages are available.
- Input / output electronics is protected against the RF & conducted noise with high level of protection devices.
- All the available models are provided with 3 way isolation with galvanic as well as optical isolation.
- A very compact size of 22.5mm width enclosures reduces panel space.
- Use of high frequency power supplies reduces the panel heating using multiple isolators.
- All the models are provided with front side Zero & span adjustment presets for field fine tuning if required.
- A very attractive DIN rail plastic enclosure for ease of mounting.
- All the products are provided with 24 months of warrantee for any manufacturing defects.
Product Photos
